All materials on this Website (the "Site"), and the Site itself are protected by copyrights, trademarks and/or other intellectual property rights. These materials are owned by The Metal Arts Guild of Canada ("MAGC") or by the artists who created these materials. View Full Copyright Notice or this network's Terms of Service
Posted by CharlesBMoore01 on January 19, 2019 at 3:12am
Posted by fusion33 on January 18, 2019 at 2:40am
Posted by trustteam2 on January 16, 2019 at 9:44pm
Posted by Ritesh Patil on January 16, 2019 at 10:09am
Posted by fusion33 on January 14, 2019 at 10:09pm
Hi everyone - I work with a costume jewellery maker in Toronto and we are looking for someone to help us make custom metal pieces made of brass. The size is about 10-15 cm and we need it to have a highly polished, glossy finish in gold. Please contact me and I will tell you more about it and send you a sketch of the piece.
Hi Ali, I have done a fair bit of brass work in the last little while. I also have a TIG welder that can weld brass so I am happy to look at your drawings and give you some feedback. please e-mail me @ firstname.lastname@example.org or call 613 813 7422, cheers
terribly sorry but could you send me your e-mail again, I believe I deleted your last message by accident. I had a look at the drawing and I think it is totally do-able. obviously it is for a costume and must be lightweight. can it be fairly thin brass ? also, the lines that run along the center of the form, do they indicate a raised ridge or bevel out to the edges? or is the piece totally 2D ? thanks.